العربية

Which Steel Tubing Thickness Do You Need?

1.5, 2, 2.5 or 3 mm? A practical guide to choosing the right square or rectangular tube size and wall thickness for gates, railings, pergolas and structures – from Stouhi Metal in Beirut.

Recommended Size & Thickness by Application

Common practice in Lebanese workshops. For structural work, always follow your engineer’s drawings.

ApplicationSuggested tube size (mm)Wall thickness
Furniture and décor frames16×16 – 25×251.5 mm
Window and door security grilles20×20 – 25×251.5 – 2 mm
Stair and balcony railings20×40 – 30×301.5 – 2 mm
Standard yard or garden gate (frame)30×30 – 40×402 mm
Large or heavy swing gate, 3 m+ (frame)40×80 – 50×1002.5 – 3 mm
Sliding gate (frame and track side)40×80 – 60×1202.5 – 3 mm
Pergolas, canopies and shades40×80 – 50×1002 – 2.5 mm
Mezzanines and structural frames60×120 – 150×150 or beams3 – 4 mm
Trailers and truck bodies40×80 – 60×1203 mm

Three Rules of Thumb

1. The frame carries the load

Put the thickness in the frame (2–3 mm) and save weight in the infill (1.5 mm). A gate sags from a weak frame, not from thin infill.

2. Wider spans need deeper tubes

For spans over 2.5 m, increase the tube depth (40×80 → 50×100 → 60×120) before increasing the wall – depth adds much more stiffness per kilogram.

3. Outdoors, thicker lasts longer

Gates and fences exposed to rain lose steel to rust over the years. A 2 mm wall outlives 1.5 mm significantly outdoors, especially near the coast.

Check Sizes, Weights & Prices

All sizes we stock, with weights and prices per piece: square tubing and rectangular tubing. Totals by order: steel weight calculator. Need the gate built? See our gates, fences & railings service.

Tubing Thickness – Frequently Asked Questions

Is 1.5 mm or 2 mm tubing better for a gate?

For a standard gate frame, 2 mm gives the rigidity and weld strength you need; 1.5 mm is fine for the infill and decorative parts. Heavy or wide gates should move up to 2.5–3 mm.

How much heavier is 2 mm tubing than 1.5 mm?

Around 30%. For example, a 40×40 tube weighs 1.81 kg/m at 1.5 mm and 2.39 kg/m at 2 mm – see the weight charts on our tubing pages.

What tube size for a 3–4 m sliding gate?

Typically a 40×80 or 50×100 frame at 2.5–3 mm with a reinforced bottom rail. Send the opening size and a photo on WhatsApp and we will advise and quote.

Does the price change with the thickness?

Yes – steel is priced by weight, so a thicker wall costs proportionally more per metre. The size tables on our tubing pages show prices per piece.

Need steel for your project?

Stouhi Metal stocks it in Beirut, cuts it to size and delivers across Lebanon. Send your list on WhatsApp for today’s price.